What's new
By:
Filters
LiteRECORDS

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • Guest, before your account can be reviewed you must click the activation link sent to your email account. Please ensure you check your junk folders.
    If you do not see the link after 24 hours please open a support ticket.

Mastering for that fat electro house sound

A

AudioAssembly

Restricted
Has anyone had really good experiences with any particular mastering techniques/VSTs lately to get that fat electro house sound?

I'm having a hard time striking a balance between the heavy compression associated with the style and compression so heavy it hurts my ears. Any advice is appreciated!
 
I'll just compress the buss channels first to get it to the max level, then sidechain it to the bassdrum to give space for the two of them and then i'll lower a bit the frequencies that are alike of each one (for example i will remove 10-60 hz on the synth and then remove 150-300 on the bassdrum) it may sound weird by reading this but when you compress everything it would help removing the mess in frequencies. A tip appart from this that I was told is to remove any innecessary frequencies from every channel to leave room for instruments that really use them.
 
in my chain i use 2 compressors, eq, stereo imager, multiband limiter and dadda life sausage fattener, i find these work really well in the right order. hope that helps
 
richardik03 said:
I'll just compress the buss channels first to get it to the max level, then sidechain it to the bassdrum to give space for the two of them and then i'll lower a bit the frequencies that are alike of each one (for example i will remove 10-60 hz on the synth and then remove 150-300 on the bassdrum) it may sound weird by reading this but when you compress everything it would help removing the mess in frequencies. A tip appart from this that I was told is to remove any innecessary frequencies from every channel to leave room for instruments that really use them.
Click to expand...

I find that when you EQ before compressing, you want that stage to cut the unwanted frequencies, then do all your compressing then EQ again but this time you do the boosting. i dont know how much you know about compressors but they react to certain frequencies, so if you boost the hell out of say 100hz then the compressor will work harder and attack the 100hz range before compressing everything else. all i all it will change the way everything sounds compared to EQ - Compress - EQ.
I that makes sense haha
 
stallion203369 said:
I find that when you EQ before compressing, you want that stage to cut the unwanted frequencies, then do all your compressing then EQ again but this time you do the boosting. i dont know how much you know about compressors but they react to certain frequencies, so if you boost the hell out of say 100hz then the compressor will work harder and attack the 100hz range before compressing everything else. all i all it will change the way everything sounds compared to EQ - Compress - EQ.
I that makes sense haha
Click to expand...

I like to put the EQ after because i often cut frequencies more than boosting and when you comprees you are loosing a bit of your EQ settings, just different ways to work I've worked with some engineers that even use limiters instead of compressors for the bus channels haha
 
richardik03 said:
I like to put the EQ after because i often cut frequencies more than boosting and when you comprees you are loosing a bit of your EQ settings, just different ways to work I've worked with some engineers that even use limiters instead of compressors for the bus channels haha
Click to expand...

yeah thats true, i usually EQ first to cut everything out then compress then EQ again. Yeah i've jumped on the limiter bandwagon as well, i multiband compress my basses, used more to expand them
 
stallion203369 said:
yeah thats true, i usually EQ first to cut everything out then compress then EQ again. Yeah i've jumped on the limiter bandwagon as well, i multiband compress my basses, used more to expand them
Click to expand...

To be honest I use only one EQ for each channel almost everytime, I have the idea not to process the bass that much. For me if a sound needs that much processing I'll just change the synth sound (I'm working just with midi so that suits me perfectly). By the way, I found some creative ideas using vocal effects vst's on the bass sounds (mostly AVOX vst's), give this a go! :)
 
richardik03 said:
To be honest I use only one EQ for each channel almost everytime, I have the idea not to process the bass that much. For me if a sound needs that much processing I'll just change the synth sound (I'm working just with midi so that suits me perfectly). By the way, I found some creative ideas using vocal effects vst's on the bass sounds (mostly AVOX vst's), give this a go! :)
Click to expand...

Yeah thats cool, i still mix like i do with my bands and stuff but was able to transfer sort of the same techniques to dance music. Alot of my stuff is midi as well, but getting massive bass sounds has alot to do with compression, and my EQ'ing dosent look like the rocky mountains haha its more finer cuts and boosts. i agree if you need to over process something then change it. Yeah i've seen a few producers do that vox fx, still hasnt sold it for me yet
 
stallion203369 said:
Yeah thats cool, i still mix like i do with my bands and stuff but was able to transfer sort of the same techniques to dance music. Alot of my stuff is midi as well, but getting massive bass sounds has alot to do with compression, and my EQ'ing dosent look like the rocky mountains haha its more finer cuts and boosts. i agree if you need to over process something then change it. Yeah i've seen a few producers do that vox fx, still hasnt sold it for me yet
Click to expand...

FUCK! I thought my idea was original hahah, just check out Avox Mutator & Avox Warm on your bass, thy give a bit more analog feel when used right
 
ok i must be just wierd then because i eq the individual channels and use the limiter and multiband compressor on the master hahaha.
 
There is no one rule. It depends on what you are trying to do. I usually use a combo of EQ, compressor and limiter various channels (percs, bass, riff's, fx. etc are all on their individual buses). I try to stay away from compressions on Master bus. I sometimes use a limiter. And you guys should try the Sonic BBE series. Pretty amazing for mastering.
 
You must log in or register to reply here.
Back
Top